Dell XPS 430 Посібник з експлуатації - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Робочий стіл Dell XPS 430. Dell XPS 430 42 сторінки. Dell xps computer setup
Також для Dell XPS 430: Налаштування (2 сторінок)

Друкувати сторінку

optical drive cable

5. Pull the sliding plate towards the bottom of the system and hold; then, slide the drive out through the front of the computer.

sliding plate

6. If you are not replacing the drive, replace the drive panel insert (see

7. If you are installing a new drive:

a. Remove the drive panel insert (see

b. Remove three shoulder screws from the inside of the drive-panel insert and attach the screws to the new drive.

optical drive

c. Slide the drive into the drive bay until the drive clicks into position.

d. Connect the power cable and the optical drive data cable to the drive.

e. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.

8. Replace the drive panel (see

9. Replace the computer cover (see

10. Connect your computer and devices to their electrical outlets, and then turn them on.

power cable

optical drive

Replacing the Drive-Panel

shoulder screws (3)

Replacing the Drive

Panel).

Replacing the Computer

Cover).

system board

Replacing the Drive-Panel

Insert), and then go to

Insert).

step