Dell DL4300 Посібник з розгортання - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник з розгортання для Сервер Dell DL4300. Dell DL4300 33 сторінки.
Також для Dell DL4300: Початок роботи (2 сторінок), Початок роботи з системою (2 сторінок), Початок роботи з системою (2 сторінок)
Друкувати сторінку
To create a RASR USB key:
1.
Navigate to the Appliance tab.
2.
Using the left pane navigation, select Appliance → Backup.
Create RASR USB Drive window is displayed.
NOTE: Insert a 16 GB or larger USB key before attempting to create the RASR key.
3.
After inserting a 16 GB or larger USB key, click on Create RASR USB Drive now.
A Prerequisite Check message is displayed.
After the prerequisites are checked Create the RASR USB Drive window displays the minimum size
required to create the USB drive and List of Possible target paths.
4.
Select the target and click Create.
A warning dialog box is displayed.
5.
Click Yes.
The RASR USB Drive key is created. Remove the key, label, and store for future use.
Executing RASR through the RASR USB key
To execute the RASR using the RASR USB key:
1.
Insert the RASR USB key created. See
2.
Reboot the appliance through the RASR USB key.
The following message is displayed:
The secondary SD card is missing, not responding, or in write-protected
mode. Do one of the following: 1) Install a SD card media in the secondary
SD card reader. 2) Reseat or replace the SD card media.3) If write-
protected mode is expected, then no respose action is required.
Ignore the above message.
3.
Click Troubleshoot → Rapid Appliance Self Recovery.
The Recovery Tool screen is displayed.
4.
Select the Windows operating system version.
Windows cmd screen is displayed after which the RASR welcome screen is displayed.
5.
Click Next.
The Prerequisites screen is displayed.
NOTE: Ensure all the hardware and other prerequisites are checked before performing the
RASR.
6.
Click Next.
The Recovery Mode Selection screen is displayed with three options:
•
System Recovery — This option is disabled by default. To enable this option select the Windows
Backup virtual disk when creating the virtual disks using the AppAssure Appliance Recovery
Wizard. System Recovery allows you to select and restore from Windows backups that were
created on Windows backup virtual disk.
•
Windows Recovery Wizard — This option is the default Microsoft Windows Recovery wizard that
uses the network share to backup the operating system.
•
Factory Reset — This option will recover the operating system disk from the factory image.
7.
Select Factory Reset.
Creating the RASR USB
Key.
15