Dell E103S Посібник з монтажу та обслуговування - Сторінка 26

Переглянути онлайн або завантажити pdf Посібник з монтажу та обслуговування для Сервер Dell E103S. Dell E103S 34 сторінки.

Figure 18. Installing the power module assembly

Install the rear

cover.

Next steps

Follow the procedure listed in

Power supply unit

NOTE:

While replacing the hot swappable PSU, after next server boot; the new PSU automatically updates to the same

firmware and configuration of the replaced one. For updating to the latest firmware and changing the configuration, see the

Lifecycle Controller User's Guide at https://www.dell.com/idracmanuals.

Prerequisites

Follow the safety guidelines listed in the

Steps

Pull the PSU blank out of the system.

CAUTION:

To ensure proper system cooling, the PSU blank must be installed in the second PSU bay in a

non-redundant configuration. Remove the PSU blank only if you are installing a second PSU.

Installing and removing system components

After working inside your

Safety

instructions.

system..