Dell PowerApp 110 Посібник з монтажу - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник з монтажу для Сервер Dell PowerApp 110. Dell PowerApp 110 34 сторінки. Rack installation guide
Друкувати сторінку
1-4
Rack Installation Guide
Attaching the Brackets
1.
Locate one of the two brackets and align it over the two threaded holes on the
side of the appliance (see Figure 1-3).
2.
Secure the bracket to the appliance chassis using two 10-24 x 0.375-inch screws
(see Figure 1-3).
Repeat this step to install the remaining bracket on the other side of the
appliance.
12-24 x 0.5-inch
pan-head
Phillips screws
Figure 1-3. Securing the Appliance in the Rack
Installing the Appliance in the Rack
CAUTION: Due to the size and weight of the PowerApp appliance, never
attempt to install the appliance by yourself.
1.
Lift the appliance into position between the two posts, with the hole in the
mounting bracket aligned one hole above the mark you made in the two posts.
2.
Secure the appliance to the rack using a 12-24 x 0.5-inch screw through the
mounting bracket to the front of the left and right posts (see Figure 1-3).
3.
Attach the front bezel, if it is not already attached, to the appliance (see the
Troubleshooting Guide for instructions).
This completes the two-post center-mount rack installation.
10-24 x 0.375-inch
pan-head Phillips
screws (2 per
bracket)