Dell PowerEdge 4200 Series Встановлення в стійку - Сторінка 17
Переглянути онлайн або завантажити pdf Встановлення в стійку для Сервер Dell PowerEdge 4200 Series. Dell PowerEdge 4200 Series 34 сторінки. Dell poweredge 4200 servers: installation guide
Також для Dell PowerEdge 4200 Series: Посібник з монтажу (28 сторінок), Встановлення в стійку (37 сторінок)
Друкувати сторінку
(Rev. 9/8/00) FILE LOCATION: S:\SYSTEMS\MARCONI\Rackingd\7U\05KCEa00\05KCEeb0.fm
support.dell.com
Before You Begin
Before you begin installing your PowerEdge system in the rack, carefully read "Safety
Instructions" found earlier in this guide.
Recommended Tools and Supplies
Although no tools are required to install the slide assemblies, you may find the follow-
ing items make the installation easier:
•
A #2 Phillips screwdriver
•
A flat-blade screwdriver
•
Installation template, helpful in slide assembly placement and alignment
•
Masking tape or felt-tip marker, for use in marking the mounting holes to be used
Installing the Rack Kit
NOTE: For instructions on installing the PowerEdge system itself, see "Installing the
System in the Rack" found later in this guide.
The subsections that follow include instructions for performing the following tasks:
•
Removing the doors from the rack
•
Marking the rack
•
Installing the slide assemblies in the rack
•
Installing the system in the rack
•
Installing the cable tray
•
Installing the cable-management arm
•
Replacing the rack's doors
DELL CONFIDENTIAL - Preliminary
9/8/00
Rack Installation Guide
3