Dell PowerEdge 4350 Посібник з оновлення - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з оновлення для Сервер Dell PowerEdge 4350. Dell PowerEdge 4350 23 сторінки. Dell poweredge 4350 system upgrade installation guide
Також для Dell PowerEdge 4350: Встановлення в стійку (35 сторінок), Посібник з оновлення (24 сторінок), Посібник з монтажу (34 сторінок), Посібник користувача (35 сторінок)

support.dell.com

Before shutting down your system, perform these preliminary steps:

Record the system configuration

Update the ESM firmware

Update the BIOS (if necessary)

Use the RCU diskette (provided in the kit) to save the RCU configuration settings

(see your User's Guide for information).

View the system configuration screens in the System Setup program and make a

record of the settings.

If an ESM firmware diskette is included with your kit, update your ESM firmware with

the version contained on that diskette by performing the following steps. The latest

version of the ESM firmware is also available online at http://support.dell.com.

Insert the ESM firmware diskette provided in the upgrade kit into the diskette

drive.

Reboot the system.

After the system completes the boot routine, follow the instructions on the

screen.

After the Successfully Completed Done message appears on the screen,

remove the ESM firmware diskette from the diskette drive and follow the

instructions on the screen to reboot the system.

Dell PowerEdge Systems — Microprocessor Upgrade

1-3