Dell PowerEdge 830 Посібник користувача системи - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача системи для Сервер Dell PowerEdge 830. Dell PowerEdge 830 22 сторінки. Upgrade the bios before upgrading your system (.pdf)
Також для Dell PowerEdge 830: Посібник з встановлення та усунення несправностей (14 сторінок)
Друкувати сторінкуHard-drive
Flashes when data is being read from or written to the internal SATA hard drives that are connected to the integrated controller.
activity indicator
USB connectors
Connects USB 2.0-compliant devices to the system.
Back-Panel Features and Indicators
Figure 1-2
shows the controls and connectors located on the system's back panel.
Figure 1-2. Back-Panel Features and Indicators
Figure 1-3. NIC Indicators
Table 1-2. NIC Indicators
Indicator
Normal Operation
Activity
Flashing amber indicates that network data is being sent or
received.
Link
Steady green indicates that the NIC is connected to a valid link
partner on the network.
Connecting External Devices
When connecting external devices to your system, follow these guidelines:
Most devices must be connected to a specific connector and device drivers must be installed before the device operates properly. (Device drivers are
l
normally included with your operating system software or with the device itself.) See the documentation that accompanied the device for specific
installation and configuration instructions.
Always attach external devices while your system is turned off. Next, turn on any external devices before turning on the system (unless the
l
documentation for the device specifies otherwise).
For information about individual connectors, see your Installation and Troubleshooting Guide. For information about enabling, disabling, and configuring I/O ports
and connectors, see
"Using the System Setup
Program."
Figure 1-3
shows the NIC indicators on the back panel.
Error Condition
When off at the same time that the link indicator is off, the NIC is not
connected to the network.
When off at the same time that the activity indicator is off, the NIC is not
connected to the network.