Dell PowerEdge R200 Посібник з оновлення - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з оновлення для Сервер Dell PowerEdge R200. Dell PowerEdge R200 28 сторінок. Suse® linux enterprise server 9
Також для Dell PowerEdge R200: Посібник з інсталяції (28 сторінок)

Друкувати сторінку
Figure 1. Removing and Installing the Optional SATA Optical Drive
6
1
SATA data cable
4
mounting holes (4)

Installing the Optical Drive

CAUTION:
Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. Before you begin this
procedure, review the safety instructions that came with the system.
1 Align the optical drive's mounting holes with the retaining pins
on the hard drive 0 bracket. See Figure 1.
2 Rotate the drive downward until it snaps into place.
3 Connect the SATA data and power cables to the optical drive.
4 Close the system. See "Closing the System" in your Hardware Owner's
Manual.
2
1
2
SATA power cable
5
bracket release lever
4
3
3
retaining pins (4)
6
hard drive 0
5