Dell PowerEdge R805 System Посібник з розв'язання - Сторінка 37
Переглянути онлайн або завантажити pdf Посібник з розв'язання для Сервер Dell PowerEdge R805 System. Dell PowerEdge R805 System 40 сторінок. Vmware esx server 3i
Також для Dell PowerEdge R805 System: Інструкція з монтажу Посібник з монтажу (21 сторінок)
Друкувати сторінкуIf you do not specify a password in the command line, you will be
prompted for one when the command executes.
EX: vicfg-cfgbackup --server 172.17.13.211 --username root –s
backupdate.dat
If you are running the RCLI, the backup file will be placed locally.
Restoring the Configuration of your ESX 3i Host
To restore a host's configuration data:
1 Power off any virtual machines that are running on the host you want to
restore.
2 (Optional) Restore the host to the build number used when the backup
file was created. The backup process does not support restoring to later
builds; though, this can be overridden this requirement by using the –f
option. Use at your own risk.
3 On a host other than the one you want to restore, start the RCLI, log in.
4 Run the vicfg-cfgbackup command with the –l flag to load and restore the
backup file to the host.
The -portnumber and -protocol options are optional. If you exclude them,
the defaults are port 443 and protocol HTTPS.
If you do not specify a password in the command line, you will be
prompted for one when the command executes.
EX: vicfg-cfgbackup --server 172.17.13.211 --username root –l
backupdate.dat
Following a successful restore, the system will reboot using the new
configuration.
Please consult the VMware ESX Server 3i Setup Guide for complete
instructions for these backup and restore commands.
Solution Guide
37