2Y-LINK PT068B12 Посібник користувача - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник користувача для Міксер 2Y-LINK PT068B12. 2Y-LINK PT068B12 2 сторінки. Pig tail mixer

Друкувати сторінку
Wiring Notes
• The following table shows the necessary wire gauge for twin bell wire over the
The following table shows the necessary wire gauge for twin bell wire over the
expected length between camera and TV Monitor.
expected length between camera and TV Monitor.
PT068A12
AWG20
CAT5
PT068A12
AWG20
CAT5
PT068A12
AWG20
CAT5
Note :
1.
For camera power range 9-16W (1300mA/12VDC), High Power Model (Signal Processor :
CI-01-ASP-DI, Mixer : PF150A12D) can be used. [ NO local power for camera]
2.
For camera power over 8W and/or covering extended distances (over 1000m), local power
supply for camera is required.
3.
If local power is needed for camera and ground level difference effect occurs, the Ground
Loop Isolator (PF-ISO/PT-ISO) can be installed together with Mixer to eliminate electrical
noise and hum.
Specification
Video input
Power Supply
Operating temperature
Dimensions
Suitable for any Camera with following specification:
Each Camera Rating
Each Camera Video output
150mA
PT068B12
≤
500~1000m
500m
500~700m
≤500m
350mA
PT068B12
≤
500~800m
500m
≤400m
680mA
PT068A12
≤
500m
≤
200m
≤
500m
≤100m
PF-ISO
: 1Vp-p 75-ohm
: 48VDC .Max
: -10°C ~ + 50°C
: 67mm x 35mm x 21mm
: 12VDC, 8W. Max.
: 1Vp-p 75-ohm
250mA
PT068A12
≤
500m
≤
500m
500mA
PT068A12
≤
500m
≤
200m
Local Power for Camera
(see Note 2 & 3)
PT068B12
500~900m
500~900m
2
PT068B12
500~1000m
500~600m
PT068B12
PT068C12
1000~1200m
1000~1500m
PT-ISO