Dell E1609WFP Посібник користувача - Сторінка 19

Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Dell E1609WFP. Dell E1609WFP 28 сторінок. Flat panel monitor
Також для Dell E1609WFP: Посібник з швидкого налаштування (2 сторінок)

Друкувати сторінку
Dell E1609WFP Посібник користувача

OSD Warning Messages

A warning message may appear on the screen indicating that the monitor is out of sync.
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to
use. See Specifications for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1366 X 768 @ 60Hz.
NOTE: The floating 'Dell - self-test Feature Check' dialog appears on the screen if the monitor cannot sense a video signal.
Occasionally, no warning message appears, but the screen is blank. This could also indicate that the monitor is not synchronizing with the computer.
See
Troubleshooting
for more information.
Setting the Optimum Resolution
1. Right-click on the desktop and select Properties.
2. Select the Settings tab.
3. Set the screen resolution to 1366x 768.
4. Click OK.
If you do not see 1366 x 768 as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following
procedures.
If you have a Dell desktop or portable computer:
Go to support.dell.com, enter your service tag, and download the latest driver for your graphics card.
¡
If you are using a non-Dell computer (portable or desktop):
Go to the support site for your computer and download the latest graphic drivers.
¡
Go to your graphics card website and download the latest graphic drivers.
¡

Using the Tilt

You can tilt the monitor to best fit your viewing needs.