DH2 Solutions Abloy DA460 Інформація - Сторінка 2
Переглянути онлайн або завантажити pdf Інформація для Система відкривання дверей DH2 Solutions Abloy DA460. DH2 Solutions Abloy DA460 3 сторінки. Door operator
Друкувати сторінкуYou can also open the door manually if required by either pushing or pulling the door open.
However, it is important that the door is not forced to close as this will damage the
operator. Let the door close automatically.
It is important that the door is NOT locked with the key. If this is required, the operator
should be switched into manual mode using the switch on the side of the operator.
Operation of the opener whilst the door is locked will damage the unit.
is set to manual operation only, but will still automatically close.
On/Off Switch – positioned on the side of the unit
For normal operation of the door from the key fobs and push buttons the switch
•
should be set to the 'ON' position
When the switch is put into the 'OFF' position the door will operate as a manual door.
•
These are fitted to both sides of
the door (if required). These
sensors stop the door from
operating if anyone or anything is
positioned in front or behind the
door when it is moving. It is important that they are kept clean and not covered up
otherwise the operator will no longer work.
NB: If you are having any difficulty in operating the door firstly, please check (if fitted)
that there is no object which may be interfering with the range of the safety sensors.
Secondly, switch the door operator into the 'OFF' position, leave for 1 minute, and then
switch to the 'ON' position
Enabling Independence through Technology
On the side of the operator you will find a switch with 3
positions.
For normal operation of the door using the key fobs and push
•
buttons the switch should be set to the 'Auto' mode
When the switch is put into the 'Open' mode the door
•
operator will open and stay open.
When the switch is put into 'Manual' mode the door operator
•
Optional - Safety Sensors
Switches