Dell E1910f Посібник користувача - Сторінка 27

Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Dell E1910f. Dell E1910f 35 сторінок. Flat panel monitor

Back to Contents Page

Setting Up the Monitor

Dell™ E1910/E2210 Flat Panel Monitor User's Guide

Attaching the Stand

Connecting the Monitor

Organizing Your Cables

Attaching the Soundbar (optional)

Removing the

Stand

NOTE:

The stand is detached when the monitor is shipped from the factory.

To attach the monitor stand:

1. Remove the cover and place the monitor on it.

2. Fit the two tabs on the upper part of the stand to the groove on the back of the monitor.

3. Press the stand till it snaps into its place.

WARNING:

Before you begin any of the procedures in this section, follow the

To connect your monitor to the computer:

1. Turn off your computer and disconnect the power cable.

Connect the blue (VGA) cable from your monitor to your computer.

NOTE: If your computer supports a white DVI connector, connect the white DVI cable (that ships with your monitor) to

the monitor and the DVI connector on your computer.

NOTE: Do not connect both the blue VGA and the white DVI cables to the computer as all monitors ship with the VGA cable

attached to the monitor.

2. Connect either the white (digital DVI-D) or the blue (analog VGA) display connector cable to the corresponding video port on the back of your

computer. Do not use both cables on the same computer. Use both the cables only when they are connected to two different computers with

appropriate video systems.

Safety

Instructions.