Dell E228WFP Посібник користувача - Сторінка 27

Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Dell E228WFP. Dell E228WFP 38 сторінок. Flat panel monitor
Також для Dell E228WFP: Посібник з налаштування (2 сторінок), Брошура та технічні характеристики (3 сторінок), Інформаційний бюлетень (4 сторінок), Посібник користувача (8 сторінок)

Auto Adjust

Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for us

setup.

Select to activate automatic setup and adjustment. The following dialog appears on a black screen as the monitor self

Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune y

the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.

Image settings:

Pixel Clock (Coarse)

Phase (Fine)

Color Settings

NOTE: When using DVI source, the Positioning option is not available.

NOTE: In most cases, Auto Adjust produces the best image for your configuration.

NOTE: When using DVI source, the Auto Adjust is not available.

The Phase and Pixel Clock adjustments allow you to more closely adjust your monitor to your preference. These settings are acces

OSD menu, by selecting Image Settings.

Use the - and + buttons to make adjustments. (Minimum: 0 ~ Maximum: 100)

If satisfactory results are not obtained using the Phase adjustment, use Pixel Clock (Coarse) and then use Phase (fine), again.

NOTE: This function may change the width of the display image. Use the Horizontal function of the Position menu to center

display image on the screen.

NOTE: When using DVI source, the Image Settings option is not available.

Color Settings adjusts the color temperature, color hue, and saturation.

The color hue is most noticeable in areas of white.

Auto Adjust In Progress