Allied Telesis z AT-8700XL Series Посібник зі швидкого встановлення - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Програмне забезпечення Allied Telesis z AT-8700XL Series. Allied Telesis z AT-8700XL Series 10 сторінок. At-8700xl series switch
Також для Allied Telesis z AT-8700XL Series: Усунення несправностей (5 сторінок), Як налаштувати (9 сторінок)
Quick Install Guide
Figure 1: AT-8724XL front panel and rear panel with AC power inlet.
Front panel
25
26
Uplink Module Bays
Rear panel
AC SUPPLY DATA
HZ
~
100-120/200-240
50/60
Input Vdc
+3.3
+5
+12
R.P.S.
INPUT
CLASS 1
LASER
AC Power
AT-RPS8000 RPS Connector
C613-04042-01 REV E
5.
Install uplink modules (optional)
If you purchased uplink modules, install them now by following the
instructions in the Uplink Module Quick Install Guide.
6.
Place the switch in its operating location
If installing the switch in a rack:
•
Remove the rubber feet.
•
Attach the rack-mounting brackets.
•
Mount the switch in the rack.
7.
Check the supply voltage and the switch's rated voltage
AC versions of AT-8700XL Series switches are fitted with a universal main
power supply that will function over the range 100–240 VAC and
50–60 Hz.
DC versions of AT-8700XL Series switches require a supply voltage in the
range 39–60V DC.
The specific power supply requirements for a particular model are clearly
displayed on the rear or underside of the switch. If the supply is outside
the accepted range for the switch, the switch may not operate or damage to
the switch may result.
8.
Apply AC power to the switch (for AC models)
Plug the power cord into the AC power connector on the switch's rear
panel. The Fault LED should flash for approximately 10 seconds as the
switch runs internal tests. If the LED continues to flash or remains lit, refer
to the AT-8700XL Series Hardware Reference for troubleshooting information.
10BASE-T / 100BASE-TX
1X
3X
5X
7X
9X
2X
4X
6X
8X
10X
10/100 BASE Ports
AMPS
4/2
A Max
13
8
1
11X
13X
15X
17X
19X
21X
12X
14X
16X
18X
20X
22X
Advanced Fast Ethernet Switch
PORT ACTIVITY
RS-232
TERMINAL PORT
23X
L /A
100M LINK /
ACTIVITY
10M LINK /
ACTIVITY
D/C
FULL DUP
HALF DUP/
COL
1
3
5
7
9
11
13
15
17
19
21
23
ASYN0
L /A
D/C
L /A
D/C
2
4
6
8
10
12
14
16
18
20
22
24
24X
Port LEDs
RS-232 Terminal Port
5
AT-8724XL
STATUS
FAULT
RPS
RESET
PWR
System
LEDs