Dell W2600 Посібник користувача - Сторінка 36

Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Dell W2600. Dell W2600 49 сторінок. 26” lcd tv
Також для Dell W2600: Налаштування (2 сторінок), Посібник з налаштування (іспанською) (2 сторінок)

Problem

Poor picture quality when using a device

connected to the ANT/Cable (coaxial)

connector

Nothing appears on my TV

Possible Solution

Ensure TV is selected as the input source in the Input

Select menu. See "Input Select Menu" on page 26 for

more information.

Press Menu on the remote control, select Setup, and

then select Channel Setup. This resets the channels.

Check the aspect ratio settings in the OSD. Press the

Menu button on the remote control and select Size.

For more information on using the OSD, see "Using

the On-Screen Display" on page 25.

Reset the original factory defaults. Press Menu on the

remote control, select Setup, and then select Factory

Reset.

Adjust the color temperature. Press Menu on the

remote control, select Picture, and then select Color

Temperature.

The problem may be with your device, contact your

service provider.

Ensure the TV is turned on.

Verify that all the cables are properly connected to the

TV, including the power cable.

Check to see if there is a blue or amber light on the

lower, right-hand corner of the TV. A blue light

indicates the TV is on. An amber light, means the TV

is in power save mode.

Ensure the proper source is selected in the Input

Select menu. See "Input Select Menu" on page 26 for

more information.

Reconnect any devices that are currently connected to

the TV. If you are using multiple devices, connect and

test one device at a time.

Connect another device that you know is working

properly.

Reset the original factory defaults. Press Menu on the

remote control, select Setup, and then select Factory

Reset.

Troubleshooting Your TV