Dell PowerEdge R520 Посібник з монтажу - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник з монтажу для Зберігання Dell PowerEdge R520. Dell PowerEdge R520 8 сторінок. 2-socket, 2u rack server
Також для Dell PowerEdge R520: Посібник (11 сторінок), Посібник для початківців (9 сторінок), Посібник з портфоліо (27 сторінок), Технічний посібник (50 сторінок)
Друкувати сторінку
Overview
This document provides important information for installing the second
processor in Dell PowerEdge R520 and PowerEdge R420 systems.
Before You Begin
To install a second processor in your system, you must ensure that you have:
•
Replaced the dummy fan in the FAN 6 slot with a cooling fan.
For more information on replacing the fan, see "Removing a Cooling Fan"
and "Installing a Cooling Fan" in the relevant Owner's Manual on
support.dell.com.
•
Upgraded the riser cards as indicated in the table below:
Table 1-1. Riser Upgrade Information
PowerEdge
System
R520
Riser1_1P: One half-height,
half-length x4 link
Riser2_1P:
• One full-height, full-length x8
• Two full-height, half-length x4
R420
Riser1_1P: One half-height,
half-length x4 link
Riser2_1P: One full-height,
half-length x16 link
For more information on replacing the riser cards, see "Expansion Cards
and Expansion-Card Risers" and "Technical Specifications" in the Owner's
Manual at support.dell.com.
NOTE:
When selecting or upgrading your system configuration, verify the system
power consumption with the Dell Energy Smart Solution Advisor at dell.com/ESSA
to ensure optimum power utilization.
From
link
link
Upgrade
Riser1_2P: One half-height,
half-length x16 link
Riser2_2P:
• One full-height, full-length x8
link
• Two full-height, half-length x8
link
Riser1_2P: One half-height,
half length x16 link
Same as Riser2_1P
Additonal Processor Installation
To
3