Dell PowerVault 56F Посібник з підключення - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник з підключення для Зберігання Dell PowerVault 56F. Dell PowerVault 56F 38 сторінок. Dell powervault 56f switches rack installation guide
Також для Dell PowerVault 56F: Посібник користувача (6 сторінок), Посібник з інсталяції (8 сторінок), Посібник користувача (42 сторінок), Посібник з монтажу стійки (28 сторінок)

2-2

Dell PowerVault 5xF Switches Zoning Guide

In addition to the zones themselves, zoning includes several components, such as

zone members, zone aliases, and zone configurations. These components are

referred to as zone objects and are identified as follows:

Zones are specified by zone names.

Zone members are specified by physical fabric port numbers or worldwide

names. See "Zone Members," found later in this chapter, for more information.

Zone aliases (symbolic names) are used to simplify zone member administration.

See "Zone Aliases," found later in this chapter, for more information.

Zone configurations are sets of zones configured during zone specification. You

can select which zone configuration is in effect or disable a zone configuration at

any time.

You can designate a zone member by using one of the following notations:

Use a pair of decimal numbers, separated by a comma, to specify a physical fabric

port number. For example,

matically assigned at the time the fabric is configured by the fabric controller.

When you specify a zone member by a physical fabric port number, all devices con-

nected to that port are in the zone. If the port is an arbitrated loop, then all loop

devices are also in the zone.

Use an eight-hex number separated by colons to specify a worldwide name, such as

A worldwide name provides no field information to the zone. The eight bytes are sim-

ply compared with the port names presented by a device in a login frame (FLOGI or

PLOGI). When you specify a zone member by a port name, only that single device

port is recognized by the zone.

The type of zone members used to define a zone may be mixed, like the following:

2,5; 2,7; 10:00:00:60:69:00:00:8a

specifies port 6 on domain 2. The domain ID is auto-