Dell PowerVault DX6104 Посібник користувача - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник користувача для Зберігання Dell PowerVault DX6104. Dell PowerVault DX6104 39 сторінок. Dx object storage platform
Також для Dell PowerVault DX6104: Посібник для початківців (8 сторінок), Посібник для початківців (10 сторінок), Посібник (37 сторінок), Примітка до випуску (16 сторінок), Посібник (12 сторінок), Посібник (24 сторінок), Посібник (23 сторінок)

Figure 1. Local Cluster Configuration

Redundant DX Cluster Services Nodes

The Dell DX Storage Cluster supports redundant DX Cluster Services Nodes. In a redundant model, the active DX Cluster

Services Node is configured as the primary node and the redundant node is configured as the secondary node.

The primary Cluster Services Node contains the cluster configuration files, active networking utilities, and active

content router services. A manual failover process is required if the primary DX Cluster Services Node fails to promote

the secondary DX Cluster Services Node. For more information, see the "Failover" section of the

(CSN) Installation and Configuration Guide at dell.com/support/manuals. Since there is a combined virtual IP address for

the primary DX Cluster Services Node, a failover to a redundant DX Cluster Services Node is transparent to all

applications. When a failover is transparent, an IP address change is not required. However, the application services

remain unavailable until the manual failover of the Cluster Services Node is complete.

NOTE: After a secondary CSN has been promoted to active (primary), it remains as the primary, and the original

primary CSN must be configured as the secondary.

For more information, see the

Cluster Services Installation and Configuration Guide at dell.com/support/manuals.

Cluster Services Node