Dell PowerVault MD3060e Series Посібник адміністратора - Сторінка 24

Переглянути онлайн або завантажити pdf Посібник адміністратора для Зберігання Dell PowerVault MD3060e Series. Dell PowerVault MD3060e Series 48 сторінок. Storage enclosure
Також для Dell PowerVault MD3060e Series: Посібник з апаратного та програмного забезпечення (25 сторінок), Посібник з монтажу (11 сторінок), Посібник для початківців (10 сторінок), Інформаційне оновлення (8 сторінок), Інструкція з монтажу стійки (2 сторінок), Налаштування (2 сторінок), Посібник з розгортання (24 сторінок), Посібник адміністратора (35 сторінок), Посібник для початківців (10 сторінок), Посібник з розгортання (24 сторінок), Посібник користувача (40 сторінок), Налаштування (2 сторінок)

Dell PowerVault MD3060e Series Посібник адміністратора
Command syntax
secli (list emms | listemms | le) (-a=<(SAS WWID | AdapterIndex)> [-enc=<(WWN |
EnclIndex)>] [-outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-
outputformat=<SupportedOutputFormats>] | [-h])
Parameters
Table 9. List EMMs
Parameter
-a
-enc
-h
-outputformat
Command examples
list emms -a = 1
list emms -a = 1 -enc = 0
list emms -a = 500abcdefgh12345
list emms -enc = 500a123456789012 -outputformat = xml

List drawers

Description
This command lists the drawers accessible from the specified enclosure. Depending on your enclosure,
you may have one drawer or multiple drawers.
Command syntax
secli (list drawers | listdrawers | ldraw) (-a=<(SAS WWID | AdapterIndex)> -
enc=<(WWN | EnclIndex)> [-outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-
outputformat=<SupportedOutputFormats>] | [-h])
Parameters
Table 10. List drawers
Parameter
-a
-enc
24
Desription
Specify the adapter used for the command. This is
either SAS WWID or AdapterIndex.
Specify the enclosure used for the command. This
is either WWN or EnclIndex.
Provides more information about the command,
description, and usage.
You can specify the following output formats: xml
or json.
Description
Specify the adapter used for the command. This is
either SAS WWID or AdapterIndex.
Specify the enclosure used for the command. This
is either WWN or EnclIndex.