Dell PowerVault MD3200i Series Посібник з монтажу - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник з монтажу для Зберігання Dell PowerVault MD3200i Series. Dell PowerVault MD3200i Series 18 сторінок. Storage arrays
Також для Dell PowerVault MD3200i Series: Посібник з розгортання (41 сторінок), Посібник з оновлення (32 сторінок), Інструкція з монтажу стійки (2 сторінок), Посібник користувача (46 сторінок), Матриця підтримки (12 сторінок), Інформаційне оновлення (1 сторінок), Матриця підтримки (11 сторінок), Матриця підтримки (17 сторінок), Технічний посібник (38 сторінок), Біла книга (22 сторінок), Посібник (16 сторінок)

Dell PowerVault MD3200i Series Посібник з монтажу
Table 4-1. Common Issues and Resolutions
Issue
Turning the Linux system off, takes a long
time.
The CIM client methods fail due to
authentication error or "Return Code
-4".
The following message is displays when
you use the CIM CLI application:
roundTripTime is incorrect in
ClientOpPerformanceData
16
Troubleshooting the SMI-S Provider
(continued)
Recommended Action
No action recommended. Exiting the SMI
provider can take up to 15 minutes in
Linux environments.
During installation, you do not run into
any issues with the storage array password
because the SMI-S Provider does not yet
have information about the storage arrays
to manage. However, after you add the
storage arrays, a Return Code - 4
message is displayed for any method that
runs. A specific error message is not
displayed other than the return value, but
the SMI-S Provider trace log shows that
the method failed because of an
authentication failure. Update the
Property - Secret with the current storage
array password in the
<OEM>SharedSecret instance by using
Modify Instance CIM. You can perform
this operation from the client used for
communicating with SMI-S Provider (for
example, CIM Navigator).
You can ignore this message when using
the CIM command line interface.