Dell PowerVault MD3600f Series Посібник з розгортання - Сторінка 28

Переглянути онлайн або завантажити pdf Посібник з розгортання для Зберігання Dell PowerVault MD3600f Series. Dell PowerVault MD3600f Series 36 сторінок. Remote replication
Також для Dell PowerVault MD3600f Series: Посібник з конфігурації (22 сторінок), Посібник з монтажу (18 сторінок), Матриця підтримки (17 сторінок), Функціональний посібник (15 сторінок)

The least queue depth with subset policy treats large block requests and small

block requests equally. The data path selected is in the path group of the

RAID controller module that owns the virtual disk.

Changing Load Balance Policies in Windows Sever 2008

Load balancing with the PowerVault MD3600 series is only available for

Windows Server 2008 or later versions of the operating system. You can

change the load balance policies from the default round robin with subset by

using one of the following:

•

Device Manager options

•

Disk Management options

Changing the Load Balance Policy Using Windows Server 2008 Device

Manager Options

1 From the host desktop, right-click My Computer and select Manage to

open the Computer Management window.

2 Click Device Manager to show the list of devices attached to the host.

3 Right-click the multi-path disk device for which you want to set load

balance policies, then select Properties.

4 From the MPIO tab, select the load balance policy you want to set for this

disk device.

Changing the Load Balance Policy Using the Windows Server 2008 Disk

Management Options

1 From the host desktop, right-click My Computer and select Manage to

open the Computer Management window.

2 Click Disk Management to show the list of virtual disks attached to

the host.

3 Right-click the virtual disk on which you want to set the load balance

policy, then click Properties.

4 From the MPIO tab, select the load balance policy that you want to set for

this virtual disk.

Load Balancing