Dell PowerVault MD3860i Series Посібник користувача - Сторінка 30
Переглянути онлайн або завантажити pdf Посібник користувача для Зберігання Dell PowerVault MD3860i Series. Dell PowerVault MD3860i Series 50 сторінок. Storage arrays
Друкувати сторінку
3.
SAS chain cable (two per physical-disk drawer)
Removing The SAS Chain Cable(s)
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Remove the cooling fan module from one side on the back of the chassis.
CAUTION: If you are hot swapping the SAS cable chains, ensure that you complete the
procedure on one side within ten minutes to avoid over heating of the storage enclosure.
CAUTION: Ensure that you are removing the SAS cable chain for the failed physical-disk
drawer. Removing the SAS cable chain for the incorrect physical-disk drawer causes loss of
data access and causes virtual disks to appear degraded in the MD Storage Manager.
2.
Locate and identify the SAS chain cables for the failed physical-disk drawer.
3.
To remove the chain cable mounting bracket from the midplane, insert your finger into the release
tab (oriented vertically), and pull the mounting bracket completely out of the storage enclosure.
4.
To remove the chain cable mounting bracket from the physical disk drawer, insert your finger into
the release tab (oriented horizontally), and pull the mounting bracket completely out of the storage
enclosure.
5.
Install the cooling fan module.
6.
Repeat the above mentioned steps for the SAS cable chain on the other side.
30