Dell PS-M4110 Посібник - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник для Зберігання Dell PS-M4110. Dell PS-M4110 22 сторінки. Blade array

5.2 PowerConnect M8024-K

The PowerConnect M8024-k IO module supports the "iSCSI Auto-configuration" feature. When enabled,

the switches will automatically enable link level flow control on all ports of the switch and configure the

switch for jumbo frames (mtu 9216).

Monitoring for EqualLogic storage arrays via LLDP is also enabled by this command. Upon detection of

an EqualLogic array, the specific interface involved will have spanning-tree portfast enabled and unicast

storm control disabled. These changes appear in the running config.

Disabling iSCSI Optimization does not disable flow control, portfast, or storm control configuration

applied as a result of enabling iSCSI Optimization.

Note: iSCSI Auto-configuration only configures the global switch settings as described here and the

individual port settings for ports that have active EqualLogic iSCSI port connections. Host port

connections must still be configured manually.

console>enable

console#config

console(config)#iscsi enable

Note: Flow control is enabled by default on the PowerConnect M8024k.

If the state of the flow control setting is unknown, use the following commands to enable:

console>enable

console#config

console(config) #no mode simple

console>enable

console#config

console(config)#flowcontrol

console(config)#exit

console# copy running-config startup-config

console#exit