Dell PS4110 Посібник користувача - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник користувача для Зберігання Dell PS4110. Dell PS4110 20 сторінок. Storage arrays
Також для Dell PS4110: Посібник з експлуатації обладнання (50 сторінок), Огляд (7 сторінок), Посібник користувача обладнання (48 сторінок), Встановлення (2 сторінок)

Using Lasso

Lasso compiles information for all the devices in the Storage Area Network

(SAN). It also includes company and site contact information. You can save

this information as a configuration file (.xml format) for later use. Lasso

collects data for the selected devices and generates a report that can be

uploaded to Dell Technical Support site.

This section provides information to use Lasso to collect data about various

storage devices in your Storage Area Network (SAN).

Before using Lasso to collect data, make sure the following pre-requisites are

met:

•

IP connectivity is available for the required devices.

•

For PowerVault MDSeries devices, MD Storage Manager software is

installed on the system where Lasso is running.

•

For data collection in XML and HTML format, .Net Framework 2.0 or

later and a Service Pack of version 1.0 or later is installed.

•

For EqualLogic, MD series, and Compellent devices, .Net framework 2.0

or later must be installed on the remote Windows host.

•

For EMC SAN, use a system that is not a fibre channel attached host.

•

For EqualLogic, Compellent, and MD series devices, the SAN Surfer CLI

(iSCSI) software must be installed on the remote Windows, Linux, and

VMware hosts to successfully collect iSCSI HBA information.

•

For a QLogic iSCSI HBA device, install iscli on UNIX servers.

•

For Compellent SAN, the HBA Anywhere CLI must be installed on the

remote Windows, Linux, and VMware host to successfully collect Emulex

FC HBA collection.

•

For EqualLogic devices, install Lasso on one of the iSCSI hosts.

Using Lasso