Dell PS6000 Посібник з експлуатації обладнання - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник з експлуатації обладнання для Зберігання Dell PS6000. Dell PS6000 50 сторінок. Storage arrays
Також для Dell PS6000: Огляд (7 сторінок), Короткий довідник (2 сторінок), Обслуговування обладнання (50 сторінок)
Друкувати сторінку
Figure 4. Example of Network Cabling Connection
1. public network
2. cluster node 1
3. public network adapter
4. private network adapter
For Public Network
Any network adapter supported by a system running TCP/IP may be used to connect to the public network segments.
You can install additional network adapters to support additional public network segments or to provide redundancy in
the event of a faulty primary network adapter or switch port.
For Private Network
The private network connection to the nodes is provided by a different network adapter in each node. This network is
used for intra-cluster communications. The following table describes the two possible private network configurations.
Method
Network switch
Point-to-Point (two-node
clusters only)
Hardware Components
Gigabit or 10 Gigabit Ethernet
network adapters and switches
Copper Gigabit network adapters
with RJ-45 connectors
Copper 10 Gigabit Ethernet network
adapters with RJ-45 connectors
Copper 10 Gigabit Ethernet network
adapters with SFP+ connectors
5. private network
6. cluster node 2
Connection
Depending on the hardware, connect the CAT5e
CAT6, CAT6a, or CAT7 cables, the multi-mode
optical cables with Local Connectors (LCs), or the
twinax cables from the network adapters in the
nodes to a switch.
Connect a CAT5e or better (CAT6, CAT6a, or CAT7)
Ethernet cable between the network adapters in
both nodes.
Connect a CAT6 or better (CAT6a or CAT7) Ethernet
cable between the network adapters in the nodes.
Connect a twinax cable between the network
adapters in both nodes.
13