Dell Storage Center SCv2020 Посібник користувача - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник користувача для Зберігання Dell Storage Center SCv2020. Dell Storage Center SCv2020 42 сторінки. Storage center
Також для Dell Storage Center SCv2020: Посібник для початківців (19 сторінок), Посібник для початківців (20 сторінок)
Друкувати сторінку
Item Control/Feature
2
Battery fault indicator
3
MGMT port
4
REPL port
5
SAS activity indicators
6
Storage controller
module status
7
Recessed power off
button
8
Storage controller
module fault
9
Recessed reset button
10
Identification LED
11
USB port
12
Diagnostic LEDs (8)
13
Serial port (3.5 mm mini
jack)
About the SCv2000/SCv2020 Storage System
Icon Description
•
Steady green: Battery is ready
•
Off: No faults
•
Blinking amber: Correctable fault detected
•
Steady amber: Uncorrectable fault detected; replace battery
—
10 Mbps, 100 Mbps, or 1 Gbps Ethernet/iSCSI port used for
storage system management and access to the BMC
NOTE: To use the MGMT port as an iSCSI port for
replication to another Storage Center, a Flex Port license
and replication license are required. To use the MGMT port
as a front-end connection to host servers, a Flex Port
license is required.
—
10 Mbps, 100 Mbps, or 1 Gbps Ethernet/iSCSI port used for
replication to another Storage Center (requires a replication
license)
NOTE: To use the RELP port as a front-end connection to
host servers, a Flex Port license is required.
—
•
Off: Port is off
•
Steady green: Port is on, but without activity
•
Blinking green: Port is on and there is activity
On: Storage controller completed POST
Powers down the storage controller if held for more than five
seconds
•
Off: No faults
•
Steady amber: Firmware has detected an error
•
Blinking amber:Storage controller is performing POST
Reboots the storage controller forcing it to restart at the POST
process
•
Off: Identification disabled
•
Blinking blue (for 15 sec.): Identification is enabled
•
Blinking blue (continuously): Storage controller shut down
to the Advanced Configuration and Power Interface (ACPI)
S5 state
Not for customer use on SCv2000/SCv2020 Storage Systems.
—
•
Green LEDs 0–3: Low byte hex POST code
•
Green LEDs 4–7: High byte hex POST code
Not for customer use.
11