Dell EMC Edge 510 LTE Посібник з монтажу - Сторінка 16
Переглянути онлайн або завантажити pdf Посібник з монтажу для Перемикач Dell EMC Edge 510 LTE. Dell EMC Edge 510 LTE 24 сторінки. Networking switch
Також для Dell EMC Edge 510 LTE: Посібник з налаштування (8 сторінок)
Друкувати сторінку
3. Connect local devices such as computers and switches ONLY to the GE1 or GE2 ports, or through the Edge Wi-Fi.
NOTE:
Use ONLY the GE1 or GE2 1 Gb Ethernet port for LAN connection to a laptop or switch.
● GE1 or GE2
NOTE:
Ensure your laptop has Dynamic Host Configuration Protocol (DHCP) enabled to receive an IP address from the
Edge 510 LTE.
4. Open the received activation email. See
NOTE:
If you did not receive an email, request the setup instructions for your IT administrator or contact your Dell EMC
sales representative.
5. Follow the instructions in the email to complete the Edge 510 LTE activation.
NOTE:
Keep your email application open during activation.
Connect your device to power and any either ethernet cables or USB modems. Find and
connect to the Wi-Fi network that looks like velocloud- followed by 3 more letters/
numbers (e.g. velocloud-xyz), (where xyz is the last three digits of service tag of the
Edge510 unit), and use vcsecret as the password. If your laptop does not have Wi-Fi,
connect to it using an Ethernet cable.
NOTE:
Use ONLY LAN port GE1 or GE2 to connect an Ethernet cable to a computer or switch.
6. Click the activation URL which updates the cellular area and activates the SIM card in the Edge 510 LTE unit.
16
Edge 510 LTE installation
Configure Edge
activation.