Dell Force10 S25P Посібник - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник для Перемикач Dell Force10 S25P. Dell Force10 S25P 48 сторінок. Installing the s25p system
Також для Dell Force10 S25P: Посібник із швидкого старту (27 сторінок)

Dell Force10 S25P Посібник

Preface

This guide provides site preparation recommendations, step-by-step procedures for rack mounting and
desk mounting, inserting optional modules, and connecting to a power source.
After you have completed the hardware installation and power-up of the S25P, refer to the SFTOS™
Configuration Guide for software configuration information and the SFTOS™ Command Reference for
detailed Command Line Interface (CLI) information.

Information Symbols and Warnings

The following graphic symbols are used in this document to bring attention to hazards that exist when
handling the S25P and its components. Please read these alerts and heed their warnings and cautions.
Table 1
describes symbols contained in this guide.
Table 1 Information Symbols
Symbol
Warning
Danger
Caution
Warning
Note
The installation of this equipment shall be performed by trained and qualified personnel only.
Danger:
Read this guide before installing and powering up this equipment. This equipment contains two power
cords. Disconnect both power cords before servicing.
Installing the S25P System

About this Guide

Description
This symbol warns that improper handling and installation could result in bodily injury.
Before you begin work on this equipment, be aware of hazards involving electrical circuitry,
networking environments, and instigate accident prevention procedures.
This symbol informs you that improper handling and installation could result in equipment
damage or loss of data.
This symbol informs you that improper handling may reduce your component or system
performance.
This symbol informs you of important operational information.
5