3 Day Blinds METAL BLINDS Deluxe Посібник - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник для Віконні жалюзі 3 Day Blinds METAL BLINDS Deluxe. 3 Day Blinds METAL BLINDS Deluxe 6 сторінок.

Друкувати сторінку

OUTSIDE MOUNT

You will be using your blind with mounting brackets attached

to the headrail to mark the position of the brackets on your

wall or molding. To determine bracket placement, you will

need to make a small pencil mark on the back of the headrail

at either 2" or 2

" from the end of the headrail:

Blind Width

" – 13"

" – and over

| 1" Metal Blinds Deluxe

Mark Headrail

2" from each end

" from each end

• Center a bracket over

each pencil mark on the

headrail.

• Additional mounting

brackets, if required,

should be evenly spaced

between the two end

brackets.

• Make sure brackets do not

interfere with any moving

parts in the headrail.

• Hold the blind up to the

desired mounting position

over the window. Once

the blind is level, mark the

wall or molding on either

side and the top edge of

each mounting bracket.

NOTE: If using extension

brackets, attach mounting

brackets to extension

brackets with nuts and

bolts before attaching

brackets to headrail.

• Mount each bracket

making sure all brackets

are installed level and in

line with each other.

• Remove the mounting

brackets from the headrail

by pushing the back of

the bracket forward and

up with your thumb.

• Proceed to "Blind Installation"

BLIND INSTALLATION

NOTE: If the bracket interferes with any of the working parts,

the incorrect holes of the end mount bracket may have been

selected.

• Mount each bracket

making sure all brackets

are installed level and in

line with each other.

NOTE: Blinds UNDER 60"

wide require two screws

per bracket. Screws should

be mounted diagonally

from one another. Blinds

OVER 60" wide require four

screws per bracket.

Note

Proper

Position

• Hang the front lip of

the headrail onto the

mounting bracket

hook.

• Headrail must be

positioned between

the "teeth" on the

front of the mounting

bracket.

• Push the headrail back

while rotating the back

of the rail up into the

bracket.

• Pull the headrail

forward slightly until

it engages into the

bracket.