Dell Networking N2024 Оновлення прошивки - Сторінка 15
Переглянути онлайн або завантажити pdf Оновлення прошивки для Перемикач Dell Networking N2024. Dell Networking N2024 21 сторінка.
Також для Dell Networking N2024: Посібник з монтажу (49 сторінок)
Upgrade Procedure Dell™ Networking
N2024/N2024P/N2048/N2048P/N3024/N3024F/N3024P/N3048/N3048P
Switches
Reload the stack of switches.
console#reload
Management switch has unsaved changes.
Are you sure you want to continue? (y/n) y
Configuration Not Saved!
Are you sure you want to reload the stack? (y/n) y
After the stack of switches has finished rebooting, log in and verify that the firmware has been updated to the
version using the show version command. A single switch will typically reboot in around two minutes. A
6.0.1.3
stack may take significantly longer to complete the upgrade process.
console#show version
Machine Description............... Dell Networking Switch
System Model ID................... N3048
Machine Type...................... Dell Networking N3048
Serial Number..................... CN0H784T282983AR0013A00
Manufacturer...................... 0xbc00
Burned In MAC Address............. F8B1.561A.60E3
System Object ID.................. 1.3.6.1.4.1.674.10895.3058
SOC Version....................... BCM56340_A0
HW Version........................ 3
CPLD Version...................... 13
unit active
---- ----------- ----------- -------------- --------------
1
6.0.1.3
2
6.0.1.3
3
6.0.1.3
Update Boot Code using the hidden CLI command "update bootcode" from Stack Master. This will update boot
code on all members in the stack.
console#update bootcode
Are you sure you would like to update the bootcode? (y/n) y
Reload the stack of switches for boot code update to take effect.
console#reload
Management switch has unsaved changes.
Are you sure you want to continue? (y/n) y
Configuration Not Saved!
Are you sure you want to reload the stack? (y/n) y
backup
current-active next-active
6.0.0.7
6.0.1.3
6.0.0.7
6.0.1.3
6.0.0.7
6.0.1.3
Page 12
6.0.1.3
6.0.1.3
6.0.1.3