3 Day Blinds ROLLER SHADE Початок роботи - Сторінка 5

Переглянути онлайн або завантажити pdf Початок роботи для Віконні жалюзі 3 Day Blinds ROLLER SHADE. 3 Day Blinds ROLLER SHADE 8 сторінок. Continuous cord loop and link system with cassette, continuous cord loop with side channels

Друкувати сторінку

INSTALLING SHADES WITH

SIDE CHANNELS

SHADE INSTALLATION

| Cassettes and Side Channels

• Install the side guide ears.

Ensure they fit flush with the

outside of the endplates.

• Add the side channel top

and bottom caps onto the

side channel pieces.

• Before installing the side

channels, lower the shade

a little so you are able to

insert the fabric into the

caps guide.

• Locate the side channel top

cap to the side guide ear for

the correct position. Lift out

the fabric and bottom rail to

insert the fabric into the

side guides.

• Slide the channels all the

way up until they touch

the bottom of the cassette.

Hold a level on the siderails

and adjust until it is level

vertically. Then fasten with

screws in the pre-drilled holes.

Unlocked Position:

Locked Position

rotate clockwise

to lock

• Before installing the face

of the side channels, make

sure the side guide locks

are inserted.

• Once those are inserted,

the face of the side channel

should snap into place.

• Use a flat head screw

driver and rotate the locks

clockwise to secure the side

guides together.

NOTE: the channel cover

in this image has been

removed for clarity.

• Test the shade to ensure it is

operating correctly. Double

check that the side channels

are vertical and parallel

using a level.

• Run the shade down and up

to ensure correct operation.