Dell PowerConnect 6248 Примітка до випуску - Сторінка 14

Переглянути онлайн або завантажити pdf Примітка до випуску для Перемикач Dell PowerConnect 6248. Dell PowerConnect 6248 34 сторінки. Powerconnect 6200 series
Також для Dell PowerConnect 6248: Технічні характеристики (2 сторінок), Посібник з планування та підготовки (12 сторінок)

ip route Command Changed

The syntax of the ip route command has changed. The metric keyword is no longer accepted as it had no

effect. The new syntax is:

ip route ip addr subnetmask | prefix-length nextHopRtr [ preference ]

distance ospf Command Changed

The distance ospf command has been changed (for both OSPFv2 and OSPFv3) to the industry standard

syntax. The new syntax is:

distance ospf {external | inter-area | intra-area } distance

ip mtu Command Changed (Maximum Value Increased)

The maximum value for the ip mtu command has increased from 1500 to 9202. If not configured, the IP

MTU tracks the interface MTU.

bridge address Command Changed

The following bridge address command optional parameters have been deprecated:

•

delete-on-reset

•

delete-on-timeout

•

secure

port security Command Changed

The following port security command optional parameters have been deprecated:

•

forward

•

discard-shutdown

Link Dependency Available

The Link Dependency feature which has previously only been available on modular switches is now

available on all switches. The functionality is similar to the capability available on the PCM6220,

PCM8024, and the PCM6348.

This release added an action capability to link-dependency where if a dependant port goes down, as an

action option, the group's members come up versus also go down. This can be used as a form of link

redundancy as an alternative to using STP.

ISDP Advertise/Display hostname

ISDP can now use the hostname as the Device ID instead of the Serial Number. The user needs to change

the default hostname on the switch and can verify the results via the show isdp command.

System Firmware Version 3.2.0.6