Dell PowerConnect BI-RX-4 Посібник для початківців - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник для початківців для Перемикач Dell PowerConnect BI-RX-4. Dell PowerConnect BI-RX-4 32 сторінки. Powerconnect b-rx series
Друкувати сторінку
Items required for installation
This document describes how to set up the PowerConnect B-RX series and mount into 19-inch equipment racks
using the brackets built onto each chassis. To center mount the chassis in a rack, order the mid-mount rack kit from
your PowerConnect supplier. Installation instructions are provided with the rack kit. This section describes items
shipped with the PowerConnect B-RX series and items you will need for installation.
Items shipped with units
The chassis ships with the following components installed:
•
Switch fabric modules
-
Four and eight-slot chassis - two switch fabric modules
-
16-slot chassis - three switch fabric modules
•
A slot blank in each interface module slot. The slot blank covers a slot that does not currently have a module
installed in it, ensuring proper airflow within the chassis.
•
Fans
-
Four and eight-slot chassis - A fan tray assembly in the front right side of the chassis.
-
16-slot chassis - A fan tray assembly located in the front right side and two fan assemblies located at the
rear of the of the chassis.
•
Power supplies (AC or DC).
-
The four-slot chassis contains one power supply,
-
The eight-slot chassis contains two power supplies.
-
The 16-slot chassis contains four power supplies.
•
A 115V AC power cable for each AC power supply you purchase.
Items that you must provide
•
Assembled 19-inch Electronic Industries Association cabinet (EIA310-D) equipment rack.
•
Four standard #12-24 pan-head screws for mounting the chassis to equipment racks.
•
#2 Phillips-head screwdriver.
•
Flat head screwdriver
•
Mid-mount rack kit (optional). Order from your PowerConnect supplier.
What you can install
You can install the following components in the different chassis slots.
•
Four-slot chassis
-
Up to two management modules (one active and one redundant).
-
Up to three switch fabric modules.
-
Up to four interface modules.
-
Up to three power supplies (AC or DC).
PowerConnect B-RX Series Getting Started Guide
53-1001682-03
7