Dell PowerConnect M8428-k Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Перемикач Dell PowerConnect M8428-k. Dell PowerConnect M8428-k 23 сторінки. Dell poweredge m710 and m710hd - system memory update
Також для Dell PowerConnect M8428-k: Посібник з оновлення (32 сторінок), Примітки до випуску (27 сторінок), Посібник (25 сторінок), Посібник з оновлення (1 сторінок)
Rev 1.0
2
Installation and Basic Operation
2.1
Unpacking the Pass Through Module
Before you install your new PTM, unpack it and make sure that there is no visible damage that
may have occurred during shipping. Your package should contain the following items:
• Dell 10Gb Ethernet Pass Through -k module for Blade Servers
• This Users Manual
The PTM is shipped without optical modules.
If anything in the package is damaged or missing, please contact your customer representative
immediately.
2.2
Insertion and Removal of the PTM
The Dell 10Gb Ethernet Pass Through -k module may be plugged into fabric slots A1, A2, B1, B2,
C1, and C2.
Determine which slot to use, based on desired system configuration.
2.2.1 PTM Insertion
Insert the PTM into the chassis as shown in the following diagram:
8
Figure 3: Dell Chassis Slots for the PTM
Slot A1
Slot B1
Slot C1
Slot C2
Slot B2
Installation and Basic Operation
Slot A2