Dell PowerConnect W-7200 Series Посібник з монтажу - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з монтажу для Перемикач Dell PowerConnect W-7200 Series. Dell PowerConnect W-7200 Series 4 сторінки. Fan tray

Друкувати сторінку
2. Align the new fan tray module with opening in the controller, as shown in
CAUTION: Ensure that fan tray module is correctly aligned with the opening on the W-7200 Series controller. Failure to do so can
result in damage to the fan tray module.
3. Pull down the hinged captive screws on the new fan tray module and align its tabs with the slots on either side
of the opening.
4. Slide the fan tray module into the controller.
5. Lift both the hinged captive screws into the lock position then secure the fan tray module by tightening the
captive screws.
Figure 2 Installing a Fan Tray
2
Figure
Dell PowerConnect W-7200 Series Fan Tray | Installation Guide
2.