Dell Powerconnect W-ClearPass Hardware Appliances Посібник із швидкого старту - Сторінка 26
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Перемикач Dell Powerconnect W-ClearPass Hardware Appliances. Dell Powerconnect W-ClearPass Hardware Appliances 28 сторінок. W-clearpass policy manager 6.0 quick start guide
Також для Dell Powerconnect W-ClearPass Hardware Appliances: Посібник (10 сторінок), Посібник з встановлення обладнання (13 сторінок), Апаратне забезпечення (4 сторінок)
Друкувати сторінку
Configuring the Service
Follow these steps to configure Policy Manager for MAC-based Network Device access.
1. Create a MAC Authentication Service.
Table 11:
MAC Authentication Service Navigation and Settings
Navigation
Create a new Service:
Services >
l
Add Service (link) >
l
Name the Service and select a pre-
configured Service Type:
Service (tab) >
l
Type (selector): MAC
l
Authentication >
Name/Description (freeform) >
l
Upon completion, click Next to
l
configure Authentication
2. Set up Authentication
Note that you can select any type of authentication/authorization source for a MAC Authentication service. Only
a Static Host list of type MAC Address List or MAC Address Regular Expression shows up in the list of
authentication sources (of type Static Host List). Refer to
Modifying Static Host Lists" in the Dell Networking W-ClearPass Policy Manager User Guide for more
information. You can also select any other supported type of authentication source.
Table 12:
Authentication Method Navigation and Settings
Navigation
Select an Authentication Method and two
authentication sources - one of type Static Host List
and the other of type Generic LDAP server (that you
have already configured in Policy Manager):
Authentication (tab) >
l
Methods (This method is automatically selected
l
for this type of service): [MAC AUTH] >
Add >
l
Sources (Select drop-down list): Handhelds
l
[Static Host List] and Policy Manager Clients
White List [Generic LDAP] >
Add >
l
Upon completion, Next (to Audit)
l
3. Configure an Audit Server.
This step is optional if no Role Mapping Policy is provided, or if you want to establish health or roles using an
audit. An audit server determines health by performing a detailed system and health vulnerability analysis
26
Settings
Adding and Modifying Static Host Lists
Settings
Dell Networking W-ClearPass Policy Manager 6.0 | Quick Start Guide
"Adding and