Supported Server Modules
Supported platforms: M520 and M620
iDRAC7 Version: 1.40.40 or later
System CPLD Version: 1.0.6 or later
PowerEdge M520 BIOS Version: 1.7.6 or later
PowerEdge M620 BIOS Version: 1.7.6 or later
Note: Server modules with unsupported iDRAC7, BIOS, and CPLD versions may turn on in the VRTX
chassis, but can cause some unexpected issues.
What's New?
Initial Release
Fixes
Not applicable
Important Notes
The shared hard disk drives (HDDs) and PCIe cards are managed by the CMC and are not visible
to the operating system in the server modules, until the HDDs and PCIe cards are mapped by
using the CMC web interface. For instructions about mapping PCIe cards and managing the
storage subsystem, see the Chassis Management Controller for PowerEdge VRTX Version 1.0
User's Guide available at dell.com/support/manuals.
All the server modules must be turned off before updating the firmware for chassis infrastructure
and SPERC. CMC firmware can be updated while the servers are on.
Some advanced features require CMC enterprise license. For more information about the CMC
licenses, see the Chassis Management Controller for PowerEdge VRTX Version 1.0 User's Guide
available at dell.com/support/manuals.
Before updating the storage component using the web interface, make sure that the browser's
Cookies are enabled.
Known Issues
When multiple CMCs are grouped using the multi-chassis management feature in an Internet Explorer
browser, if you pause the mouse over the chassis graphics, it may incorrectly show 25 HDDs in a 12-
HDD chassis. Select the individual CMC in the group to view the correct chassis graphics, or use alternate
browsers.
Limitations
None
Друкувати сторінку