Dell S4248FB-ON Посібник з монтажу - Сторінка 35

Переглянути онлайн або завантажити pdf Посібник з монтажу для Перемикач Dell S4248FB-ON. Dell S4248FB-ON 47 сторінок. S4200-on series
Також для Dell S4248FB-ON: Посібник з налаштування (29 сторінок)

Dell S4248FB-ON Посібник з монтажу

Fan LEDs

Solid green—Fan function is normal.
Flashing yellow—There is a fan fault.
Off—Fan is off.

Fan module installation

The fan modules in the S4200-ON Series (S4248FB-ON and S4248FBL-ON) switch are field replaceable.
There are five fans. Slot 3 is in the middle of the switch and slot 5 is on the right side of the switch.
CAUTION:
DO NOT mix airflow directions. All fans must use the same airflow direction—reverse or normal. If you mix the airflow
direction, to avoid overheating your switch,
1
Take the fan module out of the shipping box.
2
Slide the module into the bay.
Figure 20. S4200-ON Series fan modules installation
1
Orange release tab

Fan module replacement

To request a hardware replacement, see
CAUTION:
Complete the following steps within one minute or the switch temperature could rise above safe thresholds and the
switch could shut down:
1
Slide the fan module out of the bay.
2
Slide the replacement module into the bay.
you must correct the mixed airflow .
Dell EMC
support.
Fans
35