Dell S5048F-ON Оновлення мікропрограми - Сторінка 6

Переглянути онлайн або завантажити pdf Оновлення мікропрограми для Перемикач Dell S5048F-ON. Dell S5048F-ON 19 сторінок.
Також для Dell S5048F-ON: Посібник з налаштування (29 сторінок)

Друкувати сторінку

5. onie-updater

For example:

root@ubuntu-16:/var/www/html# ftp xx.xx.xxx.xx

Connected to xx.xx.xxx.xx.

220 (vsFTPd 2.0.5)

Name (xx.xx.xxx.86:root): gk

331 Please specify the password.

Password:

230 Login successful.

Remote system type is UNIX.

Using binary mode to transfer files.

ftp> cd /tftpboot/users/gk/<platform>

250 Directory successfully changed.

ftp> get onie-firmware-x86_64-dellemc_<platform>_c2538-rx.x.xx.x.x-x.bin

local: onie-firmware-x86_64-dellemc_<platform>_c2538-rx.x.xx.x.x-x.bin remote: onie-

firmware-x86_64-dellemc_<platform>_c2538-rx.x.xx.x.x-x.bin

200 PORT command successful. Consider using PASV.

150 Opening BINARY mode data connection for onie-firmware-x86_64-

dellemc_<platform>_c2538-rx.x.xx.x.x-x.bin (10344311 bytes).

226 File send OK.

10344311 bytes received in 0.92 secs (10.7153 MB/s)

ftp> bye

221 Goodbye.

root@ubuntu-16:/var/www/html# ls

onie-firmware-x86_64-dellemc_<platform>_c2538-rx.x.xx.x.x-x.bin

root@ubuntu-16:/var/www/html# mv onie-firmware-x86_64-dellemc_<platform>_c2538-

rx.x.xx.x.x-x.bin onie-updater

For more information, see the

Verify firmware update

After you have updated the firmware, verify that all components—BIOS and CPLD, are running the correct version.

● To check the BIOS version, use the dmidecode -s system-version command. The BIOS version also displays during

system bootup.

● To check the CPLD version, use the showSystemInfo command if you are using Dell DIAGs. Or use the

cpldupgradetool --cpldver command if you are using EDA-DIAGs.

Firmware update staging

ONIE and the open compute project (OCP) recommends the following name for the firmware updater image:

onie-firmware-x86_64-VENDOR_MACHINE-r0.bin

Get the ONIE firmware updater image from the Dell support site at www.dell.com/support. Use this image to update the

BIOS and CPLD on supported platforms. The current firmware version updater image supports the BIOS and CPLD image on

supported platforms.

Firmware update staging from NOS

1. Download the ONIE firmware image from the Dell support site to your local network.

2. Download the ONIE updater binary image to the switch or target.

3. Mount the ONIE-Boot partition where the ONIE tool resides.

You can clear or remove any previously staged firmware using the purge command.

ONIE:/ # onie-fwpkg purge

Removing all pending firmware updates (y/N)? y

Purging all pending firmware updates.

ONIE:/ # onie-fwpkg

** Pending firmware update information:

Open Computer Project

wiki at www.github.com.