Dell S6000-ON Посібник для початківців - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник для початківців для Перемикач Dell S6000-ON. Dell S6000-ON 26 сторінок. Open networking
Також для Dell S6000-ON: Посібник з усунення несправностей (29 сторінок), Посібник з монтажу (41 сторінок)

Installing an AC Power Supply

To install an AC power supply, follow these steps.

NOTE: The PSU slides into the slot smoothly. Do not force the PSU into a slot as

this may damage the PSU or the S6000-ON chassis.

NOTE: Ensure that the PSU is correctly installed. When the PSU is correctly

installed, the power connector is on the left side of the PSU and the status LED is at

the bottom of the PSU.

NOTE: If you use a single PSU, install a blank plate in the other PSU slot. Dell

Networking recommends using power supply 2 (PSU2) as the blank plate slot.

Step

Task

Remove the PSU slot cover from the S6000-ON (the PSU side of switch). You

may select either of the two PSU slots.

Remove the PSU from the electro-static bag.

Insert the PSU into the switch PSU slot (insert the PSU exposed PCB edge

connector first).

The PSU slot is keyed such that the PSU can only be fully inserted in one

orientation.

1 - PSU

2 - Slot

When the PSU is installed correctly, it snaps into place and is flushed with the

back of the switch.

Installation