Dell S6010-ON Посібник з монтажу - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник з монтажу для Перемикач Dell S6010-ON. Dell S6010-ON 46 сторінок.
Також для Dell S6010-ON: Примітки до випуску прошивки (12 сторінок)
Друкувати сторінку
LED
PSU LED
Prerequisite
The following is a list of components you need to install the system:
NOTE:
For more information, see
•
S6010–ON chassis or multiple chassis, if stacking.
•
AC or DC country/regional-specific cables to connect the AC or DC power source to each of the chassis' AC or DC power supplies.
•
Dell ReadyRail™ mounting brackets for rack installation.
•
Screws for rack installation.
•
Grounding kit for chassis—GND lug, L-bracket, and screws
Items that are not included:
•
GND lug and screws for rack
•
Ground wire
•
Crimping tool
•
Anti-oxidant compound—Dell recommends NOALOX 4 or equivalent
•
Thread-locker compound—Dell recommends Threadlocker Blue 242 or equivalent
•
#1 and #2 Phillips screwdrivers
•
Torx screwdriver
•
Copper/fiber cables
Other optional components are:
•
Extra fan module—recommended for redundancy
•
Extra mounting brackets—if installing in a four-post rack or cabinet
S6010–ON Configurations
You can order the S6010–ON system in several different configurations. You can also order optional modules and optics separately.
You can order the following supported hardware components:
•
S6010–ON AC or DC Normal Airflow: 32 fixed 40 Gbps QSFP+ ports, two AC power supply units and five fan subsystems. Airflow is
from the I/O side to the PSU side.
•
S6010–ON AC or DC Reverse Airflow: 32 fixed 40 Gbps QSFP+ ports, two AC power supply units and five fan subsystems. Airflow
from the PSU side to the I/O side.
•
Fan with airflow from the I/O side to the PSU side
•
Fan with airflow from the PSU side to the I/O side
•
AC or DC power supply with airflow from the I/O side to the PSU side
•
AC or DC power supply with airflow from the PSU side to the I/O side
Site Preparations
and
Install the
Description
•
Solid green—fan is operating normally
•
Solid amber—fan failure
•
Off—no power to PSU/failure
•
Solid green—PSU is operating normally
•
Blinking green—PSU is turned off
S6010-ON.
S6010–ON System
11