Dell SwitchX M4001Q Посібник користувача - Сторінка 16
Переглянути онлайн або завантажити pdf Посібник користувача для Перемикач Dell SwitchX M4001Q. Dell SwitchX M4001Q 27 сторінок. Infiniband blade switch i/o module for poweredge m-series
Друкувати сторінку
Rev 1.2
3
Cluster Management and Firmware
3.1
Network Management and Clustering Software
Download and install, on all nodes, the Mellanox OpenFabric software package for Linux, Windows, or
other operating systems from the Mellanox software website:
http://www.mellanox.com
This software package provides connectivity for server and storage systems utilizing High Perfor-
mance Computing (HPC) or enterprise data center (EDC) applications across an InfiniBand fabric.
It also provides a Subnet Manager for simple network configuration, network administration, and
diagnostic tools for network management.
3.2
Updating Firmware
The switch is delivered with the latest Firmware available at the time of production. New firmware
versions will be posted on the Mellanox firmware download page. Firmware can be updated in-
band using the Mellanox Firmware Tools (MFT).
You will need the Mellanox Firmware Tools package available in MLNX_OFED to update firm-
ware for this switch. It also can be downloaded from:
http://www.mellanox.com
The latest firmware can be found at:
http://www.mellanox.com
3.2.1 Instructions for Reprogramming Over the InfiniBand Network
To reprogram the switch see
for the latest firmware and the burning instructions.
16
Mellanox Technologies
>Downloads > InfiniBand SW/Drivers.
> Downloads > Firmware Tools.
> Support > Dell.
http://mellanox.com/content/pages.php?pg=firmware_table_dell
Cluster Management and Firmware