Allied Vision Goldeye CL Посібник із швидкого старту - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Цифрова камера Allied Vision Goldeye CL. Allied Vision Goldeye CL 17 сторінок.

Connecting to the host computer

To connect the camera to the host computer, use a Camera Link cable with an

SDR-26 connector for the camera side.

To retrieve information about the required connector type for the frame

grabber (either MDR-26 or SDR-26), refer to the frame grabber manual.

1. Power up the camera and wait until the Camera Link Status LED stops

blinking. This indicates booting has been finished.

2. Launch the Vimba Viewer application and wait for the camera to appear in

the Detected Cameras list. This may take a few seconds, depending on the

number of cameras connected to the PC and the number of installed frame

grabbers.

3. Select the desired camera from Detected Cameras list.

4. A new camera window appears.