AVZ Twins Piazzola Інструкція з монтажу - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Аксесуари AVZ Twins Piazzola. AVZ Twins Piazzola 20 сторінок. Gastro awning

8. Fasten the hexagonal connecting nut with a washer on the threaded side of the tension wire. Use the

anchoring sleeve with wedge set on the other side.

9. Tighten the hexagonal connecting nut (after complete assembly of the system) until the bottom

profile is straight tensioned.

10. Place cover caps on both sides of the tension system and fasten these with M04x25 socket screws.

11. Attach the cord tensioners at 50 cm from the middle on the slanted side of the bottom profile. Note:

Cord tensioners come in left and right versions.

12. Fasten the guide blocks to the bottom profile.

13. Draw the cord through the guide block and roll it up. Lay the cord in the front profile.

Draw the cord through the guide block and roll it up

Twins Piazzola EN 27-08-2018

Page 10