Allied Vision USB3 Посібник із швидкого старту - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Цифрова камера Allied Vision USB3. Allied Vision USB3 2 сторінки. Vision cameras
Друкувати сторінку
Acquiring images
Troubleshooting
To find solutions for unexpected events, see Chapter Troubleshooting in your camera's
technical manual.
1.
Connect your USB camera to your PC via USB 3.0 cable.
2.
Start Vimba Viewer. For instructions on Vimba Viewer, see Vimba Quickstart Guide provided with the Vimba
download.
3.
Select the camera in Vimba Viewer.
The main window opens.
4.
Start acquisition to acquire the first images with your USB camera.
Using third‐party software
Using the camera with third‐party software
Allied Vision USB cameras comply with the USB3 Vision standard. They can be used with
every third‐party software that complies with the USB3 Vision standard.
Camera I/Os and LEDs
1
6
2
5
3
4
Pin
Line
Signal
GPIO 1
1
0
non‐isolated, programmable
GPIO 2
2
1
non‐isolated, programmable
In 1
3
2
opto‐isolated
Out 1
4
3
opto‐isolated, open collector
5
‐‐‐
Isolated GND for isolated I/O
6
‐‐‐
GND for GPIOs
LED signal pattern
Status
Camera startup
Power on
Command or image traffic
Camera busy
Standards conformity
CE, RoHS
Contacting Allied Vision
For ordering and general information
https://www.alliedvision.com/contact
Support
3
6-pin I/O connector
Status LED (red)
Status LED (green)
<‐>
Level
U
(low) = 0–0.8 VDC
in
U
(high) = 2–24 VDC
in
I/O
U
(low) = 0–1.0 VDC
out
U
(high) = 3.3–24 VDC @ max. 25 mA (open collector)
out
U
(low) = 0–0.8 VDC
in
U
(high) = 2–24 VDC
in
I/O
U
(low) = 0–1.0 VDC
out
U
(high) = 3.3–24 VDC @ max. 25 mA (open collector)
out
U
(low) = 0–1.0 VDC
in
In
U
(high) = 3–24 VDC
in
U
(low) = 0.3–2 VDC
out
Out
U
(high) = 3–24 VDC @ max. 25 mA (open collector)
out
‐‐‐
‐‐‐
‐‐‐
‐‐‐
WEEE
FCC
USB3 Vision
Telephone
EMEA: +49 36428‐677‐0
The Americas: +1 978‐225‐2030
Asia‐Pacific: +65 6634‐9027
China: +86 (21) 64861133
USB 3.0 Micro-B connector
GenICam
4