AWA BDU125K Посібник користувача - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник користувача для Портативний DVD-плеєр AWA BDU125K. AWA BDU125K 7 сторінок. Dvd/cd player with stereo radio usb port & sd/mmc card and remote control

Друкувати сторінку

Basic connection

The mains plug is used as disconnect device, the

disconnect device shall remain readily operable.

It is recommended to be connected to a multi-system TV.

Ensure that this player and other equipment to be

connected to the unit are in the standby or off mode and

disconnect the AC power cords before commencing

connection.

Do not block ventilation holes of any piece of the equipment

and arrange them so that air can circulate freely.

Read through the instructions before connecting other

equipment.

Ensure that you observe the color coding when connecting

audio, video cables.

Note:

During DVD play, the TV volume may be at a lower level

than during TV broadcasts, etc. If this is the case, adjust

the volume to the desired level.

If the DVD/CD player is connected to the TV through a

video cassette recorder, the picture may not be played back

normally with some DVDs. If this is the case, do not

connect the player via the VCR.

To video input connector (yellow)

To audio input connectors (red, white)

Video/audio cable

OPERATIONS

PREPARATION

Power on the TV set and select video input mode.

GET STARTED

1. Insert the AC cord to the AC socket of player, and plug the

other end to an applicable wall outlet. slide the FUNCTION

switch to the DVD/USB/CARD position.

2. Open the disc tray.

3. Place a disc onto the disc tray.

4. Close the disc tray and the playback starts automatically.

5. When a menu screen appears on the TV, move the navigation

buttons or press the numeric buttons to select a preferred

track number, then press OK button to start playback.

ADJUST THE VOLUME

Adjust the volume to your favorite by rotating the volume

control.

SKIP AHEAD OR BACK

Press NEXT or PREVIOUS button on the remote or SKIP

DOWN/PREVIOUS BUTTON &SKIP UP/NEXT BUTTON once

during play to skip a chapter(DVD) or a track (CD) ahead or

backwards.

To power outlet

AC power cord

RAPID ADVANCE/REVERSE

During playback, press and hold F.FWD button or F. BWD

button several times to scan the disc forward or backward at

X2, X4, X8, X20 normal speed.

Press PLAY button to resume normal play.

STOP PLAYBACK

Press STOP button during playback to stop playback; the

player activates its resume function when STOP is pressed in

STOP mode; press PLAY button again, playback resumes at

the point it stopped previously; open the disc tray or press the

STOP button one more time to clear the resume function.

SLOW-MOTION PLAY (DVD)

Press and hold ZOOM/SLOW button on the remote control

during playback, the disc will be played at 1/ 2 normal speed

at first, each time this button is pressed, the play speed

becomes slower (down to 1/7 normal speed.)

Press PLAY/PAUSE button, normal play will resume.

REPEAT

Press REPEAT button during play, it will repeat play one

chapter/title or repeat all (for DVD disc), or repeat play a track

or all tracks (CD), or repeat the specified points (A-B).

SEARCH FOR PREFERRED SCENE

1. Press SEARCH button during play and highlight the item to

be played (Title, Chapter, or Chapter time)by navigation

buttons.

2. Input the desired number or time via the numeric buttons.

3. Press OK Button to confirm and the playback from the

located scene starts.

4. To exit search menu, press SEARCH button directly.

PROGRAM PLAY(UP TO 16 MEMORIES)

1. Press PROGRAM during playback to display the program

menu.

2. Select location(s) to be memorized via navigation buttons

and then enter desired Titles/Chapters numbers via

numeric buttons.

Note

: Inputting leading zero is not necessary. If the

chapter/title/track number is behind the cardinal 10, press

the unit digital key first and then another unit digit. Some

figure inputs may be useless, because it 's greater figure

than total title/chapter/track number on the disc.

Example: Track 3, press "3"

Track 12, press "1" and then "2"

Track 21, press "2" and then "1"

3. To start programmed playback, select PLAY on the menu, and

then press OK Button on the remote control.

pressing PROGRAM button again to exit programming.

4. To clear all items, select the <CLEAR> on the menu, and then

press OK button on remote control.

5. To change programmed items, scroll the Navigation button to

the item to be changed and enter the desired track number on

the screen, the selected item will be changed.

6. You can also cancel program mode by clearing all the items in

the program menu.

ZOOM PLAY

Press the ZOOM/SLOW key continuously to zoom in the picture

by 2, 3, and 4 times, zoom out by 1/2, 1/3, 1/4 normal size.

Press this key once more when the picture is at 1/4 size to return

to the normal size display.

Scroll to view the enlarged picture using Navigation buttons.

ON SCREEN DISPLAY INFORMATION

When the player is in operation, press DISPLAY button

continuously on the remote control, the screen will display parts

of information(current disc type, title number, chapter number,

playtime, audio language, audio type, subtitle language and

multi angle, etc) in a sequence.