360 BANDIT WHITE 8000 Інструкція з монтажу - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Промислове обладнання 360 BANDIT WHITE 8000. 360 BANDIT WHITE 8000 4 сторінки.
Друкувати сторінкуINSTALLATION INSTRUCTIONS
WHITE 8000
BEFORE YOU BEGIN...
HELPFUL TOOLS
Hammer/Mallet
Wrench Sizes: 15/16", 10mm, 12mm, and 16mm
Socket Sizes: 15/16", 10mm, 12mm, and 16mm
Impact Driver/ Socket Wrench
STEP 1
REMOVE CLOSING SYSTEM
1
2
Remove (1) 16mm bolt 1, (3) 12 mm bolts 2 and stop bolt
3 to uninstall the closing system from the row unit.
Discard the 16 mm bolt. Retain the 12 mm bolts, nuts, and
washers and stop bolt.
With all the hardware removed, remove the closing system
and set aside.
PAGE 2
STEP 2
INSTALL MAIN BANDIT FRAME
2
3
Slide the main BANDIT frame 4 in where the closing
system was just removed. Loosely secure with the (3) 12
mm bolts, nuts, and washer previously removed 2.
Ensure the BANDIT frame is in-line with the row unit before
completely tightening.
4