360 electrical Revolve3.4 Посібник із швидкого старту - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Захист від перенапруги 360 electrical Revolve3.4. 360 electrical Revolve3.4 12 сторінок. Surge protector with 4 rotating outlets + 2 usb
Друкувати сторінку
QUICK SETUP
1.
First, remove the screw from the wallplate
covering your wall outlet. Do not remove
the wallplate but rather hold it in place.
Dexterity level of one required here folks.
Make it happen.
2.
Align the plug from your Revolve3.4 with
the top wall socket. Note: if your wall
outlet is installed upside down or is
installed horizontally just ip your
Revolve3.4 to match.
3.
Make sure the mounting screw on your
Revolve3.4 is aligned with the hole in your
wallplate and use a phillips head
screwdriver to firmly secure the Revolve3.4
in place. NOTE: We know you're tough, but
take 'er easy on the mounting screw. Over
tightening = sadness. Now you can plug
things in and out without worrying about
pulling the Revolve3.4 out of the wall. Not
to mention it's less likely to be stolen by
your neighbor Larry.
4.
"Oh no! My wall outlet doesn't look like
that, what do I do with the mounting screw?!"
If you have "decorator-style" wall outlets,
props to you for your fashion sense. Use a
phillips head screwdriver and just "Hold On"
to that little red tab as you back the screw out.
Now plug your Revolve3.4 in, effectively
covering your fancy outlet.
Plug your devices into your
5.
Revolve3.4. To t a bulky
adapter, just plug into
one of the 360° rotating
outlets and turn to t another.
Go ahead, show it who's boss.
UL STATEMENT
CAUTION:
a) To reduce the risk of electric shock – Disconnect power to the receptacle before
installing or removing the unit. When removing receptacle cover screw, cover
may fall across plug pins or receptacle may be dislodged;
b) Use only with duplex receptacle having center screw;
c) Secure unit in place with screw provided.