Allied Vision Prosilica GT Посібник - Сторінка 17

Переглянути онлайн або завантажити pdf Посібник для Аксесуари Allied Vision Prosilica GT. Allied Vision Prosilica GT 18 сторінок.

7. Insert and tighten the four M2 x 10 socket head cap screws at a maximum torque of 4 lbf-in (0.45 Nm).
Figure 31: Inserting the four M2 x 10 socket head cap screws of the front assembly

9.6. Mounting the lens

Damage to the sensor
If you want to use your camera without lens, observe
Damage to sensor and lens
If the lens exceeds maximum protrusion, camera or lens may be damaged.
• To avoid damaging the sensor or the back lens, use lenses with a maximum
• Mount your optics according to the manual of the lens manufacturer and the Prosilica GT User Guide.
9.7. Focus recalibration
Should lens mounts have to be recalibrated for Prosilica GT cameras, follow the instructions in the user
guide.
Prosilica GT User Guide
i
Download the Prosilica GT User Guide from
technical-documentation/prosilica-gt-documentation.
protrusion within camera specifications. For details, see your camera's user
guide.
Page 17 of 18
Preparing Cameras without
NOTICE
3. Safety notes
NOTICE
www.alliedvision.com/en/support/
Sensor Cover Glass
on page 1.